Brew Coffee and Tea Machine | 茶咖机
Below are the instructions how to use this machine, if you have any enquiry regarding of this machine, kindly contact us through Facebok:  goldenchoice2u  

Please do not forget to like, share and subscribe our YouTube channel and turn on your ring bell at YouTube.

Operation Description: 1. Turn on host power. Water lamp flicker. At low water level, start heating. Heating lamp flashing.
2. When the water is full, the water inlet lights stop flashing. After heating to the set target temperature, the heating lamp stops flashing, and the panel shows the current boiler temperature.

Bubble Setting:
1. Press “Brew set”. Enter the brewing setup program (If you set a password you need to enter a password to enter). At this point the 1-4 keys will all flicker.
2. Press 1-4 keys. Enter the brewing setting. Different brewing conditions were set according to their brewing characteristics.
A. Water volume: Set the amount of water needed for brewing. (Maximum value can be set 10000cc)
B. Brewing temperature: Set the temperature needed to brew. (Maximum value can be set 99 °C)
C. Soaking time: Set the time for brewing in the water. (Soaking time should not be less than total stirring time)
D. Name input: Name input is divided into “简”, “繁”, “English”. Three modes, “简”, “English” In the mode, the keypad “繁” be popped up at the input, and the name can be entered directly. You can’t enter the font directly, you will pop up the name menu according to the input, and you can only choose the name of the brewing in the menu (After the name is set, the button will not display the number and display the current name)
3. Press “Return”. Complete the brewing settings and return to the main interface. (4 different types can be set independently).

Cycle Setting:
1. Press “cycle setting”. Enter the Stirring setting (If you set a password you need to enter a password to enter) At this point, the key 1-4 keys will all flicker.
2. Press 1-4 keys. Enter the cycle settings for this option different mixing conditions were set according to the type of brewing.
a. Cycle: Set cycle to turn on or off
b. Cycle time: Set each action time. (The maximum set of 600sec)
3. Press “Return”. Complete the mixing setup and return to the main interface.

Intake Setting:
1. Press “Cycle Setting”. Enter the Stirring setting (If you set a password you need to enter a password to enter). At this point, the 1-4 keys will all flickers.
2. Press 1-4 keys. Enter the air pump settings, according to the characteristics of the type of bubble set their own different intake time. a. Intake: Set intake to turn on or off. b. Intake time: Set each action time. (The maximum set of 180sec)
3. Press “Return”. Complete the mixing setup and return to the main interface.

Start Brewing:
1. After the brewing conditions are set, the top cover of the machine is opened and the filter screen is taken out.
2. Put the tea or coffee powder that needs brewing into the filter screen and close the machine lid.
3. Place the heat preservation bucket at the outlet.
4. After the heating is finished, press lightly to start brewing and enter the brewing interface.

Parameter setting: Press “Setting”.
Enter the parameter setting interface, Adjustable settings F1 – F9. Parameter values.
F1 Hot water target temperature: Setting boiler temperature value.
F2 Temperature compensation: A. Boiler temperature compensation: Adjust the boiler water temperature error.
F3 Water inlet extend time
F4 Flowmeter calibration
F5 Password setting
F6 Cleaning setting
F7 Instructions
F8 Maintenance
F9 Other Settings:
A. Language switch: Modify operation language (繁/简/English)
B. Buzzer action: Set the buzzer switch.
C. Restore the original settings: Reset all parameters will restore the original factory default value.
D. Machine number: Original factory settings are not subject to change.
E. Date of manufacture: Original factory settings cannot be changed.